Lighting Instructions - Slant/Fin VICTORY VSPH SERIES User's Information Manual

V
ICTORY VSPH Models
Aquastat
120/24V transformer
Figure 1. Location and Identification of parts.
WELCOME TO OUR VALUED CUSTOMER
You are now the owner of a Slant/Fin Victory VSPH gas-fired
boiler, another quality heating product designed and manu-
factured by an industry leader, to provide your family with
many years of reliable comfort and trouble-free performance.
The care and maintenance of your new boiler is important to
prevent a hazardous condition which might result form lack
of proper servicing. Therefore, you should perform regular
"owner" inspections as described in this manual (and report
any concerns to a qualified service technician) as well as
have your boiler serviced by a qualified service technician at
least once a year, preferably before the beginning of each
heating season.

LIGHTING INSTRUCTIONS

Locate, read and then follow the procedures on the lighting
instructions label attached to the boiler. For reference, we
have reproduced those instructions in this manual.
Keep the boiler area clean and free of all materials that can burn.
NEVER close or reduce openings that supply air for the boiler fire and for ventilation.
Air flow proving switch
DO NOT use this boiler if any part has been
underwater. Immediately call a qualified service
technician to inspect the boiler and to replace
any part of the control system and any gas
control which has been underwater.
Should overheating occur or the gas supply
fail to shut off, DO NOT turn off or disconnect
the electric supply to the circulator pump.
Instead, shut off the gas supply at a location
SLANT/FIN DOES NOT PERMIT THE USE OF
VENT DAMPERS ON VICTORY SERIES
BOILERS. OTHER DAMPERS OR DEVICES
WITH SIMILAR PURPOSE ARE NOT
WARNING
EXTERNAL to the appliance.
WARNING
PERMITTED.
2
Blower assembly