Honeywell TE923W User Manual page 7

A
B
C
D
A. LED INDICATOR
•
Flashes once when the remote sensor transmits a reading to the main unit
•
Flashes twice when battery power is low
B. BATTERY COMPARTMENT SCREW
Holds battery compartment door in place
C. U-SHAPED SENSOR HOLDER
Holds UV sensor in upright position
D. CURCULAR GROUND STAND
Secures sensors in the sensor holder on the flat surface
E. UV SENSOR LID
Covers UV sensor and seals battery compartment
F. BATTERY COMPARTMENT
Holds two AA-size batteries
G. BATTERY COMPARTMENT DOOR
Covers two AA-size batteries
Assembly
•
Snap the U-shaped sensor holder onto the UV sensor unit side grooves
•
Insert the round end of the U-shaped holder into one of the mounting hardware pieces
provided
Battery installation
•
Unscrew the lid on top of the UV sensor unit.
•
Remove the screw from the battery compartment door with a small Phillips
7
G
F
E