Honeywell TE923W User Manual page 8

screwdriver
•
Insert two 2 "AA" size 1.5V batteries (not included) matching the polarities shown in
the battery compartment.
•
Replace the battery compartment door and secure the screw
•
Screw the UV sensor unit lid back
Mounting
There are three different options available for mounting the UV sensor: ground stand, stake and
wall mount.
Ground:
•
Insert the U-shaped sensor holder round end into the circular ground stand opening,
matching 2 round holes in the opening
•
Secure the sensor in a location with a maximum sun exposure throughout the day.
Stake:
•
Snap the sharp stake end onto the metal bar and secure with the screws provided.
•
Insert the other end of the metal bar into the U-shaped sensor holder and secure with the
screws provided.
•
Secure the sensor in a location with a maximum sun exposure throughout the day.
Wall:
•
Insert the wall mounting end into the metal bar and secure with the screws provided.
•
Snap the other end of the metal bar on to the U-shaped sensor holder and secure with
the screws provided.
•
Secure the sensor in a location with a maximum sun exposure throughout the day.
8