Remote Thermo-Hygrometer Sensor - Honeywell TE923W User Manual

Placement tips:
The UV sensor should be mounted in the area free of sunlight shadows or reflections from the
nearby objects.

Remote Thermo-Hygrometer Sensor

FEATURES
•
Remote data transmission to the main unit via 433 MHz signal
•
328 feet (100 meters) operating range without interference
•
LCD display of measured temperature and humidity
•
Five (5) transmission channels selection
•
Case can be wall mounted using built-in hanger
A. LED INDICATOR
•
Flashes once when the remote sensor transmits a reading to the main unit.
•
Flashes twice when battery power is low.
B. BATTERY COMPARTMENT
Holds two AA-size batteries
C. RESET
Resets all readings (requires small paper clip)
D. CHANNEL SWITCH
Selects the desired channel from 1 to 5
E. WALL-MOUNT RECESSED OPENING
Keeps the remote sensor on the wall
Note: Install the batteries and select the channel before mounting the sensor.
Battery installation
•
Remove the screws from the battery compartment with a small Phillips screwdriver.
•
Set the channel 1 through 5. The switch is located in the battery compartment. Channel 1
is typically selected if only one remote sensor is being used.
•
Install 2 "AA" size alkaline batteries (not included) matching the polarities shown in the
battery compartment.
9