Ricoh C252 Service Manual page 160

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – NA
LANIER – NA
RICOH – JP730
SAVIN – NA
SUBJECT: BLACK LINE ON PRINTOUT
SYMPTOM:
The left or/and right edges of the original can be seen on the printout as black lines.
CAUSES:
Cause 1. The paper tray side fences are not aligned with the scanner unit side fences.
or,
Cause 2. The original is smaller than the printing paper.
NOTE: The C252 has the following limitations:
The machine cannot detect the original size or printing paper size.
The machine makes the master image onto two sizes only: 253 mm x 358 mm (B4 model) or 216
mm x 358 mm (LG model). It does not change the size of the master image to match the size of the
original or printing paper.
Copyright 2005 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
C252 – 003
Paper feed direction
w w w . R i c o h U n i v e r s i t y. c o m
03/29/2005
Page 1 of 2