Table of Contents
Advertisement
ITEM
RESOLUTION
TONER SAVE LEVEL
TONER SAVE COLOUR
TONER SAVE MODE
MONO-PRINT SPEED
ORIENTATION
LINES PER PAGE
EDIT SIZE
X DIMENSION
SETTINGS
600DPI
600x1200DPI
600DPI M-LEVEL
OFF
LOW
MIDDLE
HIGH
ALL
EXCEPT 100% BLACK
ON
OFF
AUTO
COLOR SPEED
NORMAL SPEED
PORTRAIT
LANDSCAPE
5~64~128LINES
CASSETTE SIZE
A4 /A5/ A6 / B5
LEGAL14
LEGAL13.5
LEGAL13
LETTER
EXECUTIVE
CUSTOM
COM-9 ENVELOPE
COM-10 ENVELOPE
MONARCH ENV
DL ENVELOPE
C5 ENVELOPE
INDEX CARD
64MILLIMETER
~
210MILLIMETER
~
216MILLIMETER
Menu functions > 43
EXPLANATION
Sets the default resolution for printing (dots per inch).
600x1200DPI uses more memory and requires more
time to process, but prints at a higher quality.
Set the toner save level.
Specify toner save for 100% black.
All: Enables toner save for all colours.
Except 100% Black: Disables toner save for 100%
black.
This function works effectively only if the data input is
color RGB data. This setting is valid in PS and PCL, but
does not take effect in the following cases.
(1) PS: If Color Matching is set OFF.
(2) PS: If any setting other than ASIC Color Matching is
set.
(3) PS: CMYK data when Ink Simulation Mode is used
(valid in any other cases except Case (1) and Case (2)
above as long as data is RGB).
(4) PCL binary data (Color/Monochrome).
Sets the monochrome print speed. Prints at the most
appropriate speed for page process if Auto is set.
Prints always at the color print speed if Color is set.
Prints always at the monochrome print speed if Normal
is set.
Selects default page orientation between portrait (tall)
and landscape (wide). - (PCL, IBMPPR & EPSON FX
only)
Sets the number of lines of text per page when raw text
is received from systems other than Windows. The
default for A4 portrait is 64, and for Letter is 60. - (PCL
only)
Sets the size of the printable page area to match the
size of paper in use. This is not the same as the physical
paper size, which is always slightly larger. For
dimensions of physical page sizes, see "Paper
Recommendations" section in this guide.
Specifies paper width of Custom paper as a default
value.
Sets a paper size at right angles to the paper run
direction.
Advertisement
Table of Contents
