Compaq Evo Notebook N1005 Series Maintenance And Service Manual page 134

2. Remove the two TM2.5 × 5.0 screws 1 that secure the optical
drive rear alignment rail to the base enclosure (Figure 5-42).
3. Remove the two TM2.5 × 5.0 screws 2 that secure the optical
drive rear alignment rail to the base enclosure.
4. Remove the rear alignment rail 3 from the base enclosure.
5. Remove the rear alignment rail 4 from the base enclosure.
Figure 5-42. Removing the Optical Drive Alignment Rails
✎
The optical drive alignment rails are included in the
Miscellaneous Plastics/Hardware Kit, spare part number
285541-001.
Maintenance and Service Guide
Removal and Replacement Procedures
5–55