Selecting Masking; Using Centering And Fit - Kodak 3000DSV-E Operator's Manual

Using Centering and
Fit
3-14
Clearing a defined Print area
• Press the Vertical and Horizontal Clear keys.

Selecting Masking

• Press the Masking key to select Masking when you want to mask a
given area of an image.
NOTE: The basic operation for Manual Masking is similar to Trimming.
Refer to the previous procedures on Trimming and defining
areas for instruction on performing Manual Masking.
Once the image on the screen has been manually trimmed or auto
masked, the Image Centering function moves the image to the center of
the print. The Fit function however, fits the image on the screen onto the
entire surface of the print.
Screen Image
Centering
Fit
Print Image
Centering Off Centering
On
Fit Off Fit On
A-61371 September 2004