Printer Test - Sharp XE-A102 Service Manual

5. PRINTER TEST

1) KEY OPERATION
5 PO
2) TEST PROCEDURE
With the above key operation , the print test pattern is repeatedly
printed.
Pressing any key will terminate the test after the completion of one
cycle print. (The receipt is issued at the end.)
6. CPU VERSION NO. PRINT
1) KEY OPERATION
6 PO
2) DESCRIPTION
The CPU version No. are printed with above key operation.
(Print example)
0102 CPU version NO.
06
This test is terminated when printing is completed.
7. BATTERY VOLTAGE SENSOR TEST
1) KEY OPERATION
7 PO
2) TEST PROCEDURE
Displays A/D conversion port read value.
0155 or greater : Normal
0154 or smaller : Low battery display
0138 or smaller : No battery display and MRS is done when power on.
To terminate the test, press any key.
Completion print
8. TIME DISPLAY TEST
1)
2)
To terminate the test and print the date and time, press any key.
9. DESTINATION DISPLAY
1)
2)TEST PROCEDURE
Display the destination code as follows.
Display
To terminate the test, press any key.
Completion print
07
XE-A102 TEST FUNCTION
– 9 –
KEY OPERATION
8 PO
TEST PROCEDURE
8 7 6 5
Display
Hour
Turn on and off(0.5s)
Print X X X X X X X X X X X X
Year Month Date Hour M inute Second
KEY OPERATION
9 PO
U and A version
Display 0
X (X:0)
09
4 3 2 1
Minute Second
0 8
V version Japan
1 3