Automatic Darning - Bernina 560 Instruction Manual

automatic darning

reverse pattern foot no. 1c
Buttonhole foot no. 3a
Darning program no. 22
Quick darning of holes or worn areas
Replaces threads along the lengthwise grain in all materials.
preparation
⦁ hoop light weight materials in the darning hoop (optional accessory)
►
the darning area stays evenly taut and cannot be distorted
Darning with reverse pattern foot no. 1c
⦁ insert the needle in the top left of the worn area
⦁
sew first row
⦁
stop sewing computer
⦁ press «Quick reverse»-button
►
the length is programmed
⦁ finish sewing the darning program
►
the sewing computer stops automatically
⦁
press the «clr»-button
►
the program is cleared
Darning with the buttonhole foot no. 3a
̶ for darning worn and damaged areas
̶ darning length max. 3cm
̶ same procedure as with Reverse pattern foot No. 1C
reinforcement
Use fine material or (adhesive) interlining as a backing.
If the darning becomes distorted
Correct with the Balance function (more about Balance-Function see
page 58).
034790.50.04 _2013-03_Manual_B560_EN
Practical stitches
69