Bernina 560 Instruction Manual page 36

needle position
⦁
move the knob in the display to the left/right using
the finger or
⦁ press the arrow icons left/right
►
the needle moves to the left/right
⦁ keep arrow button pressed
►
quick moving of the needle
►
the needle position is displayed in the
yellow-framed icon
⦁
touch yellow-framed icon
►
the needle moves to the middle (position 0)
mirror image (Left/right)
The sewing computer sews the stitch pattern
horizontally mirrored, left/right referring to the sewing
direction.
Security program
⦁
touch icon
⦁ touch «Needle»- or «Stitch plate»-icon
Overview Needle:
⦁
touch desired «Needle»-icon
►
stitch width is limited automatically
►
this prevents the inserted special needle (double
needle etc.) from hitting the presser foot or the
stitch plate = no needle breakage
►
numbers in the needle icons show the needle
distance in mm
⦁
touch «Standard needle»-icon
►
the standard needle is actived again
►
stitch width limitation is deactivated
Overview Stitch plates:
⦁ touch the desired «Stitch plate»-icon
►
stitch width is limited automatically
►
this prevents the inserted needle from hitting
the presser foot or the stitch plate = no needle
breakage
The function remains active even when the sewing
computer is turned off and on.
034790.50.04 _2013-03_Manual_B560_EN
Functions - Display
mirror image up/down
The sewing computer sews the stitch pattern vertically
mirrored up/down referring to the sewing direction.
presser foot indicator
⦁ touch icon
►
the Display is opened showing the optional presser
feet for the selected stitch pattern
⦁
touch «Back»-icon
►
the Display is closed
permanent reverse sewing
The sewing computer sews permanently in reverse.
Balance
Balances forward and reverse stitches.
pressor foot pressure
The pressor foot pressure is set via the adjustment
wheel on the left side of the headframe.
►
the respective value is visible in the icon
35