Embroidering With Foot Control; Interrupting With The Foot Control; Completing The Color; Changing Color - Bernina 560 Instruction Manual

Embroidery motifs

Embroidering with foot control

156
When embroidering with the foot control always keep it depressed.
⦁ press the foot control
►
the embroidery computer sews approximately 7 stitches and stops
automatically
►
a Display indicates that the thread end has to be cut after the start of
embroidering
⦁ release the foot control
⦁
raise the presser foot
⦁ cut the thread tail at the beginning of motif

Interrupting with the foot control

⦁ release the foot control
►
the sewing computer stops

Completing the color

⦁
press the foot control
►
the embroidery computer embroiders all the sections in the color activated
►
the embroidery computer stops automatically when complete
►
both threads are automatically cut

Changing color

►
the emboidery computer switches automatically to the next color
⦁
change color of the upper thread accordingly
⦁ embroider with the new color
«Embroidery»-display
►
after starting the motif the «Embroidery»-display appears
Embroidering via the foot control is recommended to embroider a
small sequence.
034790.50.04 _2013-03_Manual_B560_EN