Troubleshooting
General
Explanation
̶ No embroidery hoop attached
̶ Embroidery hoop attached
̶ Mega-Hoop up
̶ Mega-Hoop center
̶ Mega-Hoop down
̶ Embroidery motif is partly outside the
̶ Embroidery motif is too large
̶ Less free space on the USB stick
̶ No personal data available on the USB
̶ During the update process personal
162
Repair
hoop
stick
data was not saved on the USB stick
034790.50.04 _2013-03_Manual_B560_EN
Messages
⦁
attach embroidery hoop
⦁
remove embroidery hoop
⦁
move the Mega-Hoop to upper (1) position
⦁
move the Mega-Hoop to middle (2) position
⦁
move the Mega-Hoop to lower (3) position
⦁
re-position the embroidery motif. The area within the hoop
can be embroidered
⦁
reduce the motif size or attach a bigger hoop. The area within
the hoop can be embroidered
⦁
delete data from USB stick
⦁
check that the USB stick is inserted correctly and re-start the
sewing computer
⦁
the software was correctly updated. Personal data could not
be recovered