Samsung SPD-400 User Manual page 45

Upgrade/Reboot
1. From the Setup menu, select the
<System ( )> tab.
2. Click <Upgrade/Reboot>.
3. Select a desired item and set it
appropriately.
 Upgrade : Performs upgrading the
system.
 Factory default : Resets the system
to the factory default.
- Except network parameter : Resets all settings except for the Network Parameters.
- All : Resets all settings including the Network Parameters.
 Configuration backup & Restore : Backs up the current system settings before
performing the restoration process. The system is automatically restarts after
backup or restoration.
 Restart : Restarts the system.
To perform the upgrade
1. Click [ ].
2. Click [ ] and specify a file to
upgrade.
3. Click [Upgrade].
4. The "Update status" dialog appears
where the progression will be shown in
the bottom.

M
If you forcibly terminate the upgrade
process, upgrade will not be completed
properly.
English _45