Connecting The Network Video; Dsl/Cable Modem; Connection; Decoder Directly To Dhcp-Based - Samsung SPD-400 User Manual

network connection and setup
CONNECTING THE NETWORK VIDEO DECODER DIRECTLY
TO DHCP-BASED DSL/CABLE MODEM
Network Video Decoder
1. Use a cross cable to connect a computer and the Network Video Decoder.
2. Run the IP Installer and change the IP address of the Network Video Decoder so
that you can use the web browser on your desktop to connect to the Internet.
3. Access the Network Video Decoder using an Internet browser.
4. Move to [Setup] page.
5. Move to [Network] – [Interface], and set the network type to [DHCP].
6. Connect the Network Video Decoder, which was removed from your PC, directly to
the modem.
7. Restart the Network Video Decoder.

M
For setting the network type, refer to "Interface". (page 39)
20_ network connection and setup
INTERNET

DSL/Cable Modem

DDNS Server
(Data Center, KOREA)
Network Camera