Samsung SPD-400 User Manual page 24

network connection and setup
3. In the <Address> pane, provide the
necessary information.
 MAC (Ethernet) Address : The MAC
(Ethernet) address of the applicable
network device will be set automatically
so you don't need to input it manually.

M
You can configure the static IP settings
only if the DHCP checkbox is unchecked.
If not using a Broadband Router
For setting <IP Address>, <Subnet Mask>, and <Gateway>, contact your network
administrator.
4. In the <Port> pane, provide
necessary information.
 HTTP Port : Used to access the
network device using the Internet
browser, defaulted to 80.
Use the spin button to change the
HTTP Port value.
 VNP Port : Used to control video
transfer from a network camera or encoder.
The Network Video Decoder's VNP port needs no configuration. The default value
is 1234, which is not to be modified.
5. Enter the password.
This is the login password for the "admin" user who accesses the network device.
The default password is "4321".

J
The default password can be exposed to a hacking thread so it is recommended to change the
password after installing the product.
Note that the security and other related issues caused by the unchanged password shall be
responsible for the user.
6. Click [OK].
Manual network setup will be completed.
24_ network connection and setup