Samsung SPD-400 User Manual page 35

To add a quad layout
1. Click the [Add quad layout (
button.
2. Select devices from the added single
layouts to be assigned to each channel.
3. Enter the <Layout name>.

Up to 15 letters can be entered, and the layout
list displays up to 7 letters and <...> will
appear for the rest.
4. Select the audio output channel of the quad layout from the assigned 4 channels.
You can select a device if the device's audio is set to <ON> in its single layout.
5. Click the [Add (

M
Up to 8 quad layouts can be added. Note that one single layout cannot be assigned to the same
quad layout multiple times.
However, a single layout can be assigned to multiple quad layouts.
Available resolutions for quad layouts
Some resolutions may not be supported by quad layout of the Network Video Decoder,
depending on the CODEC used.
Selecting a not supported resolution will display an error message.
Before adding, refer to the available resolutions below.
CODEC
Quad layout

M
In Quad mode display of resolution less than 960x540, each video will be centered to its split
screen if all 4 channels' videos have the same resolution. At the moment, 320x240 and 352x240
video will be enlarged to 640x480 and 704x480 respectively.
)]
)] button.
H.264
1280x720p ~ 320x240
(except 800x600)
<2nd split displays video having resolution of less than 960x540>
MPEG-4
1280x720p ~ 320x240
4CIF ~ 320x240
MJPEG
(except 800x600)
English _35