Dram Timing Control - Asus Z97M-PLUS User Manual

DRAM Timing Control

The subitems in this menu allow you to set the DRAM timing control features. Use the <+>
or <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [1] – [63]
DRAM COMMAND Rate [Auto]
Configuration options: [Auto] [1] [2]
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [1] – [15]
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [1] – [511]
DRAM Refresh Interval [Auto]
Configuration options: [Auto] [1] – [65535]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [1] – [16]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [1] – [15]
DRAM FOUR ACT WIN Time [Auto]
Configuration options: [Auto] [1] – [255]
DRAM WRITE to READ Delay [Auto]
Configuration options: [Auto] [1] – [15]
DRAM CKE Minimum Pulse Width [Auto]
Configuration options: [Auto] [1] – [15]
DRAM CAS# Write Latency [Auto]
Configuration options: [Auto] [1] – [31]
3-18
Chapter 3: BIOS setup