Asus Z97M-PLUS User Manual page 48

Uatx motherboard
Hide thumbs Also See for Z97M-PLUS:
Table of Contents

Advertisement

* LAN ports LED indications
Activity Link LED
Status
OFF
ORANGE
Orange (Blinking) Data activity
Orange (Blinking
then steady)
** Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Headset
2.1-channel
Light Blue
Line In
Lime
Line Out
Pink
Mic In
Orange
Black
Gray
2-12
The plugged USB 3.0 device may run on xHCI mode or EHCI mode, depending on the
operating system's setting.
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
Due to the design of the Intel
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
Multi-VGA output supports up to three displays under Windows
displays under BIOS, and one display under DOS.
Due to design of the Intel
display architecture, below are the following onboard
®
graphics output and their maximum supported pixel clocks:
-
DVI port supports: 165 MHz
-
VGA port supports: 180 MHz
-
HDMI port supports: 300 MHz
Description
No link
Linked
Ready to wake up
from S5 mode
4.1-channel
Line In
Front Speaker Out
Mic In
Rear Speaker Out
®
9 series chipset, all USB devices connected to the
Speed LED
Status
Description
OFF
10 Mbps connection
ORANGE
100 Mbps connection
GREEN
1 Gbps connection
5.1-channel
Line In
Front Speaker Out
Mic In
Center/Subwoofer
Rear Speaker Out
Chapter 2: Basic installation
OS environment, two
®
ACT/LINK
SPEED
LED
LED
LAN port
7.1-channel
Line In
Front Speaker Out
Mic In
Center/Subwoofer
Rear Speaker Out
Side Speaker Out

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents