Asus Z97M-PLUS User Manual page 31

4. USB 2.0 connectors (10-1 pin USB910; USB1112; USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
Z97M-PLUS
Z97M-PLUS USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
5. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
Z97M-PLUS
Z97M-PLUS Digital audio connector
The S/PDIF module is purchased separately.
ASUS Z97M-PLUS
USB910 USB1112
PIN 1 PIN 1 PIN 1
SPDIF_OUT
USB1314
1-17