Dram Timing Control - Asus B150M Pro Gaming User Manual

2.5.5 EPU Power Saving Mode [Disabled]
The ASUS EPU (Energy Processing Unit) applies settings for minimum system power
consumption. Enable this item to apply lower CPU Core/Cache Voltage and help save energy
consumption.
Configuration options: [Disabled] [Enabled]
2.5.6 CPU SVID Support [Auto]
Disable this item to prevent the CPU from communicating with the external voltage regulator.
Configuration options: [Auto] [Disabled] [Enabled]
2.5.7

DRAM Timing Control

The sub‑items in this menu allow you to set the DRAM timing control features. Use the
<+> and <‑> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
2.5.8 DIGI+ VRM
CPU Load-line Calibration [Auto]
The load‑line is defined by the Intel VRM specification and affects the level of voltage
supplied to the processor. Higher load‑line calibration settings result in reduced VDroop at
the expense of voltage overshoot and will increase CPU temperature due to higher voltage
under load. Select from level 1 to 7 to adjust the load‑line slope.
Configuration options: [Auto] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] [Level 6] [Level 7]
Performance is dependent on the CPU specification. Do not remove the VRM heatsink.
CPU Current Capability [Auto]
Allows you to configure the total power range, and extends the overclocking frequency range
simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Configure higher values when overclocking or when using high current demanding stress
tests.
ASUS B150M PRO GAMING
2-19