Attaching The Seat - Razor RipRider 360 Owner's Manual

ASSEMBLY AND SET-UP
q Attaching the Rear Caster Wheels
Required Tools: 5mm allen wrench
1
Locate the threaded hole on the
rear underside of the frame. Screw
caster wheel into hole.
q Attaching the Seat
Required Tools: (2) 5mm allen wrench
1
Remove the four coupling
bolts from the frame using two
5mm allen wrenches. One on top
and one on bottom.
2
Tighten with 5mm allen wrench.
2
Align four holes in seat with
four holes in frame. Insert coupling
bolts through the top and bottom
of the frame.
3
Tighten bolts using two 5mm
allen wrenches. One on top and
one on bottom.