Samsung CLX-3175FW User Manual page 80

MESSAGE MEANING
There is a problem in
Send Error
POP3.
(POP3)
There is a problem in
Send Error
SMTP.
(SMTP)
There is a problem on
Send Error
the network interface
(Wrong Config)
card.
Stop/Clear has been
[Stop Pressed]
pressed during an
operation.
A toner cartridge has
Toner Empty
almost reached its
estimated cartridge
life.
Press OK to toggle
the message to Stop
or Continue or Black
Only.
If the black
toner cartridge
is empty,
Black Only
message does
not appear.
A toner cartridge has
Toner Exhausted
reached its estimated
cartridge life. The
printer stops printing.
Small amount of toner
Toner Low
is left in the cartridge.
The estimated
cartridge life of toner
is close.
80 _Troubleshooting
SUGGESTED
SOLUTIONS
Configure the POP3
setting.
Change to the available
server.
Configure your network
interface card correctly.
Try again.
You can select the
option among Stop,
Continue or Black Only
with the left/right arrow.
If you select Stop by
pressing OK on the
control panel, the
machine stops printing.
If you select Continue,
Stop
the machine keeps
printing, but the quality
cannot be guaranteed.
If you select Black Only,
the machine prints the
data in black. In this
case, the mono printing
feature is preset in the
printer properties.
When you copy, the
Black Start button will
be activated only with
this condition.
If you do not select any,
the machine will work as
Stop is selected.
Replace the toner
cartridge for the best
print quality when this
message appears. Using
a cartridge beyond this
stage can result in
printing quality issues.
(See "Replacing the
toner cartridge" on
page 70.)
Replace the toner
cartridge. (See
"Replacing the toner
cartridge" on page 70.)
Prepare a new cartridge
for replacement. You
may temporarily
increase the printing
quality by redistributing
the toner. (See
"Redistributing toner" on
page 69.)
MESSAGE MEANING
A problem has
Transfer Belt
occurred in the
Error
transfer belt in the
machine.
There is no paper in
Tray
the tray.
Paper Empty
The paper size
Tray
specified in the printer
Paper Mismatch
properties does not
match the paper you
are loading.
SUGGESTED
SOLUTIONS
Turn the power switch
off and on. If the problem
persists, call for service.
Load paper in the tray.
Load the correct paper in
the tray.