Using Multiple Handsets; Registering Handsets; De-Registering Handsets; Locating A Handset ("Paging") - Siemens S790 User Manual

Hide thumbs Also See for S790:
Table of Contents

Advertisement

Using multiple handsets

Registering handsets

You can register up to six handsets to your
base.
A Gigaset S79H handset can be registered
on up to four bases.
Manually registering a Gigaset S79H to
a Gigaset S790/S795
You must activate manual registration of
the handset on both the handset (1) and
the base (2).
When the registration process has com-
pleted successfully, the handset returns to
idle status. The handset's internal number
is shown in the display e.g.,
repeat the procedure. .
1) On the handset
The handset is not registered to a base.
Press the display key.
§Register§
The handset is already registered to a
base:
Ï
¢
¢
v
Registration
¢
Register Handset
If the handset is already registered to
four bases:
s
Select base, e.g.,
press
§OK§
~
If required, enter the system
PIN for the base and press
.
§OK§
A message appears stating that the
handset is searching for a base that is
ready for registration.
2) On the base
Within 60 seconds press and hold the
registration/paging key on the base
¢
(
page 4) (approx. 3 seconds).
1. If not,
INT
and
Base 3
.
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows. .
1) On the handset
Start to register the handset as described
in its user guide.
2) On the base
Press and hold the registration/paging
¢
key on the base (
sec.).

De-registering handsets

You can de-register any other registered
handset from any registered Gigaset S79H
handset.
Ï
¢
¢
v
Registration
¢
De-reg. Handset
s
Select the internal subscriber
you wish to de-register and
press
§OK§
(The handset you are currently
using is highlighted with <).
~
Enter the current system PIN
and press
Press the display key.
§Yes§

Locating a handset ("Paging")

You can locate your handset using the
base.
¤
Briefly press the registration/paging
key on the base (
¤
All handsets will ring simultaneously
("paging"), even if the ringtones are
deactivated.
Ending paging
¤
Briefly press the registration/paging
key on the base or press the talk key c
on the handset.
Using multiple handsets
page 4) (approx. 3
.
.
§Save§
¢
page 4).
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigaset s795Gigaset s790

Table of Contents