Handset Settings; Quick Access To Numbers And Functions - Siemens S790 User Manual

In idle status, the destination number
or the internal destination number is
displayed.
Sensitivity:
Select noise level sensitivity
High).
¤
Press to save the settings.
§Save§
When the room monitor function is acti-
vated, the idle display appears as shown
below:
i à V
07:15
Á
INT 1 22 Oct
Room Monitor
0891234567
OFF Options
Changing the set destination number
É
¢ ¢
v
Room Monitor
¤
Enter and save number as described in
"Activating the room monitor and
entering the destination number"
¢
( page 60).
Cancel/deactivate room monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In idle status, press the display key
deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites: The phone must support
tone dialling and the room monitor should
be set for an external destination number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There are no further
room monitor calls. The other room moni-
tor settings on the handset (e.g., no ring-
tone) will remain activated until you press
the display key
To reactivate the room function with the
(Low or same phone number:
¤

Handset settings

Your handset is preconfigured, but you
can change the settings to suit your indi-
vidual requirements.
Quick access to numbers and
functions
You can assign a number from the direc-
tory to each of the digit keys Q and
2 to O.
The left and right display keys have a
default function. You can change the
assignment (
The number is then dialled or the function
started by simply pressing a key.
Assigning digit keys
Prerequisite: You have not yet assigned a
number to the digit key.
¤
to
§OFF§
The directory opens.
¤
The entry is saved to the corresponding
digit key.
If you delete or edit the entry in the
directory at a later date, this will not
affect the assignment to the number
key.
on the handset.
§OFF§
Turn on the activation again and save
¢
with ( page 60).
§Save§
¢
page 62).
Press and hold the digit key
or
Press the digit key briefly and press the
display key
§QuickDial§
Select an entry and press
Please note
Handset settings
.
.
§OK§
61