Service (Customer Care); Questions And Answers - Siemens S790 User Manual

Service (Customer Care)

We offer you support that is fast and tai-
lored to your specific needs!
Our Online Support on the Internet can be
reached any time from anywhere.
www.gigaset.com/customercare
It provides you with 24/7 support for all
our products. It also provides a list of FAQs
and answers plus user guides and current
software updates (if available for the prod-
uct) for you to download.
You will also find frequently asked ques-
tions and answers in the appendix of this
user guide.
For personal advice on our range of prod-
ucts and assistance with repairs or guaran-
tee/warranty claims you can contact us
on:
UK helpdesk: 0 84 53 67 08 12.
Please have your proof of purchase ready
when calling with regard to guarantee/
warranty claims.
Replacement or repair services are not
offered in countries where our product is
not sold by authorised dealers.

Questions and answers

If you have any questions about the use of
your phone, you can contact us 24/7 at
www.gigaset.com/customercare.
The table below contains a list of common
problems and possible solutions.
The display is blank.
1. The handset is not switched on.
¥
Press and hold the end call key a.
2. The battery is empty.
¥
Charge the battery or replace it
¢
( page 12).
Not all menu items are displayed.
The menu display is restricted (standard
mode).
¥
•
Activate extended menu display
(expert mode
No Base
flashes on the display.
1. The handset is outside the range of the
base.
¥
Move the handset closer to the base.
2. The base's range is reduced because
Eco Mode is activated.
¥
Deactivate Eco Mode (
reduce the distance between the hand-
set and the base.
3. The base is not switched on.
¥
Check the base power adapter
¢
( page 10).
Please register handset
Handset has not been registered with the base
or has been deregistered.
¥
Register the handset (
Handset does not ring.
1. The ringtone is deactivated.
¥
Activate the ringtone (
2. Call divert set for "All
¥
Deactivate call divert (
3. The phone only rings if the phone number
has been transferred.
¥
Switch on the ringtone for unknown
¢
calls ( page 64).
Service (Customer Care)
¢
) ( page 25).
¢
page 53) or
flashes on the display.
¢
page 57).
¢
page 64).
Calls".
¢
page 31).
71