Table of Contents
Advertisement
5.4
GENERAL SETUP, CONTINUED
8
9
10
11
12
13
14
5.4.1
VOICE WARNING
The DVR unit can be set to play a sound file when either a Motion or Sensor event
occurs. This file can be a custom created sound file that is unique to your application.
The selected WAV file is played through speakers attached to the DVR unit.
1
2
3
4
Auto Sequencing
Time (sec)
No Sequencing on 0
FPS
Audio
TV Out Setup
Volume
Video Loss Alarm
Intensive Recording
1
Activate on Motion
Sensor Event
Play Selected WAV
Browse
When the Loop button is activated, the Auto
Sequencing Time specifies the amount of time that
elapses before switching to the next Screen Division
group.
Does not sequence through cameras that have 0 FPS
specified.
Opens the Audio enable/disable options.
Opens the TV Out setup options.
Opens the Volume controls that affect the Audio
Recording levels.
These options allow video loss to be designated as an
alarm.
Opens the Intensive Recording window which allows
you to specify the Pictures per second to be recorded.
2
3
Enables the voice warning on motion events.
Enables the voice warning on sensor events.
Plays the selected WAV file.
Used to select the location of the WAV file to use.
SETUP OPTIONS
4
5–7
Advertisement
Table of Contents
