Honeywell FUSION User Manual page 56

FUSION DVR Digital Recording and Transmission System
5.5 FRAME SETUP, CONTINUED
1
2
3
4
5
6
7
Resolution affects the total number of frames per second that are available.
The table below breaks down the number of frames available on a 240IPS DVR.
5–12
Set Default
Camera Number
Number of Frames
Frame Select
Resolution
Quality
Sensitivity
Frames Available on Fusion DVRs
Resolution
360 x 240
720 x 240
720 x 480
Selecting this option resets all camera frames and
resolutions to the default settings.
The cameras are given different numbers to
distinguish them when viewing the frame status.
Adjust the recorded frames per second by sliding the
bar to the left and right.
Displays the number of frames that are selected for
each camera.
Adjusts the frames for each camera.
Displays the available resolution options.
See additional information below.
Affects the quality of the video. Increasing the quality
of the camera can considerably reduce the amount of
pixilation within the image, but it also increases the file
size.
Adjusts the rate at which the key frame refreshes.
Sensitivity directly affects the codec being used to
record the video. Adjusting this setting can have
drastic negative effect on the quality of the video.
It is highly recommended that this setting always be
left at the default setting unless instructed by a system
administrator.
240 IPS
Available Frames
240
120
60
480 IPS
480
240
120