Table of Contents
Advertisement
Safetv Precautions
1 AWARNING
1
To prevent injury and/or fire, take the
following
precautions:
l
Ensure that the unrt is securely
installed.
Otherwise
rt may fly out of place during collisions
and other
jolts.
l
When extending
the ignition
or ground wires,
make
sure to use automotive-grade
wires or other cables
with an area of 0.75mm2
(AWGI 8) or more to
prevent
wire deterioration
and damage
to the wire
coating.
*To prevent
short circuits,
never put or leave any
metallic
objects
(e.g., coins or metal tools) inside the
unit.
l
If the unit starts to emit smoke
or strange
smells,
turn off the power
rmmedrately
and consult
your
Kenwood
dealer
l
Be careful not to drop the unit or subject
it to strong
shock.
The unit may break or crack because
it contains
glass parts.
l
Do not touch the liquid crystal fluid if the LCD is
damaged
or broken due to shock. The liquid crystal
fluid may be dangerous
to your health or even fatal.
If the liquid crystal fluid from the LCD contacts
your
body or clothing,
wash it off with soap immediately.
[ ACAUTION
)
To prevent damage to the machine, take the
folio wing precautions:
l
Make sure to ground the unit to a negative
12% DC
power
supply.
*Do not open the back covers of the unrt.
l
Do not install the unit In a spot exposed
to direct
sunlight
or excessive
heat or humidity.
Also avoid
places wrth too much dust or the possibilrty
of water
splashing.
l
Do not subject
the monitor
unrt to excessive
shock,
as it
is
a piece of precision
equipment.
l
When replacing
a fuse, only use a new one with the
prescribed
rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
*To prevent
short circuits
when replacing
a fuse, first
disconnect
the wiring
harness.
l
Do not use any screws
except
for the ones
provided.
The use of improper
screws
might result
in damage
to the main unit.
*YOU cannot view TV/ video pictures
whilst
the
vehicle
IS
moving.
To enjoy TV/ video pictures,
find a
safe place to park and engage the parking brake.
l
If you experience
problems
during installation,
consult
your Kenwood
dealer.
l
If the unit does not seem to be working
right, try
pressing
the reset button
first. If that does not solve
the problem,
consult
your Kenwood
dealer.
Reset button
FCC WARNING
This equipment
may generate
or use radio
frequency
energy.
Changes
or modifications
to this
equipment
may cause harmful
interference
unless
the modifications
are expressly
approved
in the
instruction
manual.
The user could lose the
authority
to operate
this equipment
if an
unauthorized
change or modification
is made.
I
Thus equipment has been tested and found to comply with
the lrmits for a Class B drgital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protectron against harmful interference in a
resrdential installatron
This equipment may cause harmful
interference to radio communications,
rf rt
IS
not installed
and used in accordance with the Instructions.
However,
there is no guarantee that interference will not occur in a
partrcular rnstallatron. If this equipment does cause
harmful interference to radio or television reception, which
can be determrned by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
l
Reorrent or relocate the receiving antenna.
l
Increase the separatron between the equipment and
receiver.
l
Connect the equrpment Into an outlet on a circuit drfferent
from that to which the receiver is connected.
l
Consult the dealer or an experienced radio/TV technician
for help.
piieq
This Class B digital apparatus complres with Canadian ICES-
003.
This video unit is set for rear passenger use only.
Use of this video unit in any front seat and/or
where it may be visible to the driver may be
illegal in some states and may cause driver
distraction
and accident which could injure or kill
you.
Advertisement
Table of Contents
