Av Interface Setup - Kenwood KVT-819DVD Instruction Manual

SETUP
menu
[]] Select an illumination color of receiver
buttons.
([2)
Red)
"Green": Green
"Red": Red
rn
Select an illumination color of the Sub
Display.
([2)
Blue)
"Blue": A blue color display.
"Key Sync": The same color as the this unit
buttn illumination color.
[]] Return to the original screen.
AV Interface Setup
You can set audio and visual
(AV)
interface
parameters.
Display the AV Interface screen
Touch [AV Interface] in the SETUP Menu
(page 70).
Setup each item
rn
Sets a name to be displayed when you
select a system that is connected via the AV
INPUTl port.
(12]
VIDE01)
~
~
• If you have set the navigation system connection
to "AV-IN", the display is fixed to "NAVl ".
!1J
Sets an image display of the system that is
connected via the AV INPUT2 port.
([2)
Off)
76 KVT-819DVD/KVT-839DVD
"Off": When the image source is switched,
an image entered via the AV INPUT2
port is displayed.
"On": When an image signal is entered via
the AV INPUT2 port, this image is
displayed.
[}] Sets a name to be displayed when you
select an image of the system that is
connected via the AV INPUT2 port.
([2)
VIDE02)
[I]
Selects a navigation system connection.
(~
RGB)
"RGB": Allows the Kenwood's Navigation
System to connect via its interface
cable.
"AV-IN": Allows a third-party navigation
system to connect via the AV
INPUTl port.
"Off": Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
[[] Return to the original screen.
[]] Selects an AV source to be output at the AV
OUTPUT port.
(~
AV-IN 1)
rn
Sets a method to switch to the rear view
camera video display.
(~
Off)
"On": Switches to the rear view camera
video display when engaging the
shift knob of car to "Reverse".
"Off": Switches to the the rear view camera
video display when engaging the
shift knob of car to "Reverse" and
then pressing the [V.SEL] switch
several times.