Dvd Setup - Kenwood KVT-819DVD Instruction Manual

Setup each item
Display the DVD SETUP screen
Touch [DVD SETUP] in the SETUP Menu
(page 70).
rn
Selects a disc menu language.*
(See <Language Setup>, page 72)
rn
Selects a subtitle language.*
(See <Language Setup>, page 72)
W
Selects an audio language.*
(See <Language Setup>, page 72)
[IJ
Sets the dynamic range.
([2]
Wide)*
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen
to the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
[[] Returns to the original screen.
~
~
• *
Disabled when a DVD is being played.
" " " ) -- f:'
)(S
ar ' "".,.
r
Y
tl1 " ,
""v~,,~»>=,~__
,
wil,"]
[]] Sets the cross over frequency.
[l]
Sets the sub woofer phase. (Only when
"Subwoofer" is set to "On" in Audio Setup
and "LPF SUB FREQ" is set to other than
"Through")
[[] Returns to the original screen.
You can set a crossover frequency of speakers.
Crossover Network Setup
III
Set the crossover
rn
Sets the High Pass Filter of the front speaker.
rn
Sets the High Pass Filter of the rear speaker.
W
Sets the Low Pass Filter of the sub woofer.
[IJ
Switches to the crossover setup screen.
[]] Returns to the original screen.
!D
Display the Crossover setup screen
ID
Select the speaker to set the crossover
Nextpage~
English 71