Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kenwood KVT-829DVD
Summary of Contents for Kenwood KVT-829DVD
-
Page 1: Installation Manual
MONITOR WITH DVD RECEIVER KVT-829DVD INSTALLATION MANUAL © B54-4555-00/00 (EV) - Page 2 Accessories ..1 ..1 ..1 ..2 ..1 ..1 ..1 ..1 ..2 ..4 ..4 ..2 KVT-829DVD...
-
Page 3: Installation Procedure
• If your car is not prepared for this special connection- connect it to the speaker connector in your vehicle. system, consult your Kenwood dealer. • Only use antenna conversion adapters (ISO-JASO) when the 5. Take Connector A on the wiring harness and antenna cord has an ISO plug. - Page 4 To steering remote Mute wire (Brown) Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Power control/ Motor antenna control wire (Blue/White) Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle.
- Page 5 Receiver unit Accessory ! The cable (Accessory 3) is Accessory 3 fixed with a chassis using harness band (Accessory Receiver unit FM/AM antenna input Wiring harness (Accessory 1) ILLUMI Ground wire (Black) - (To car chassis) REVERSE REMO.CONT MUTE ANT CONT P.
-
Page 6: Connecting Wires To Terminals
To link the unit’s power to the ignition, connect the ignition cable (ACC...red) to a power source that can be turned on and off with the ignition key. KVT-829DVD... -
Page 7: System Connection
System Connection To Relay Box Accessory @ Receiver unit ■ Front Preout • Audio left output (White) • Audio right output (Red) ■ Rear Preout • Audio left output (White) • Audio right output (Red) ■ Subwoofer Preout • Audio left output (White) •... -
Page 8: Optional Accessory Connection
USB terminal Receiver unit Accessory 3 Connection cable Connection cable (Included in the Disc changer) (Included in the Navigation System) Disc Changer etc. (Optional Accessory) Navigation System (Optional Accessory) TV Tuner (Optional Accessory) Connection cable (Included in the TV tuner) KVT-829DVD... -
Page 9: Installation For Monitor/Player Unit
Installation for Monitor/Player Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Accessory 5 Self-tapping screw Metal mounting strap (commercially available) (commercially available) Make sure that the unit is installed securely in place. -
Page 10: Removing The Unit
2. When the lower level is removed, remove the upper two locations. ⁄ • Be careful to avoid injury from the catch pins on the removal tool. 5. Pull the unit all the way out with your hands, being careful not to drop it. KVT-829DVD...