Setting Up The Hands-Free Phone; Selecting A Hands-Free Phone - Kenwood KVT-819DVD Instruction Manual

Setting up the Hands-Free Phone
The Hands-Free system can be set as follows.
Hands-Free Set Up screen
OJ
Sets an automatic response time after call
termination.
(f2]
"8")
"Off": This function can not use.
"0-99": Sets to calling ring time (second).
[l]
Sets a ringing tone output position.
(f2]
"Front R")
"Front L":
Outputs the tone from the
front left-hand side speaker.
"Front R": Outputs the tone from the
front right-hand side speaker.
"Front All": Outputs the tone from the
both front speakers.
W
Sets the beep of the incoming call.
(f2]
"On")
"On": Beep is heard.
"Off": Beep is canceled.
[I]
Displays the Phone Select screen.
W
Displays the Phone Delete screen.
[&]
Returns to the Hands-Free Control screen.
@2
• Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
• Select the speaker which is further from the microphone
in order to prevent howling or echoes.
Selecting a Hands-Free Phone
You can choose the Hands-Free phone from the
list.
Display the Hands-Free Set Up screen
Display the Phone Select list
Phone Select screen
OJ
Selects the cell-phone to be used as a
hands-free phone.
[l]
Returns to the Hands-Free Set Up screen.
Select a Hands-Free phone you wish to use
English
67