Kenwood KVT-819DVD Instruction Manual page 90

Display Zone Control
Audio Control
Display the Tone screen
See <Equalizer Control> (page 89).
II
Set the Tone
OJ
Bass adjustment items are displayed.
[IJ
Middle adjustment items are displayed.
rn
Treble adjustment items are displayed.
rn
Bass DC Extend settings (Only when Bass is
selected)
If turned "On", it extends the bass
center frequency to the low register by
approximately 20%.
[[] Tone curve becomes flat.
[§] Sets the Center frequency.
[I]
Sets the level.
[[] Sets the
Q
factor. (Only Bass and Middle can
be set)
[]] Returns to the original screen.
90 KVT-819DVD/KVT-839DVD
Touch [Zone Control] in the Audio Control
Menu (page 88).
Set the Zone Control
OJ
Turns the Zone Function (that sets different
source sounds for front and rear speakers)
On or Off.
[I]
Switches the front and rear audio sources.
(This button appears when the Zone
function is On.)
Use "Reverse" to change over the front and
rear audio sources.
W
Sets the front and rear audio source
separately.
(This button appears when the Zone
function is On.)