Av Input Setup; Av Interface Setup - Kenwood DDX6036 Instruction Manual

AV Input Setup

You can set AV input parameters.
1 Display the AV-IN Setup screen
>
Touch [ ] [ ]
56)
2 Set each item
[AV-IN Interruption] Sets an image display of
the system that is connected via the AV INPUT
port. ( "OFF")
"OFF": When the image source is switched, an
image entered via the AV INPUT port is
displayed.
"ON": When an image signal is entered via the
AV INPUT port, this image is displayed.
[On Screen AV-IN] Sets an on-screen display
of the AV-IN playback screen. (
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[iPod AV Interface Use] Sets the terminal
which iPod is connected. (
⁄
• This item can be set when in STANDBY source and
also the iPod is unconnected.
[AV-IN1 Name], [AV-IN2 Name], [AV-IN Name]
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port.
( "VIDEO")
>
[AV-IN SETUP]. (page
"Auto")
"iPod")

AV Interface Setup

You can set audio and visual (AV) interface
parameters.
1 Display the AV Interface screen
>
Touch [ ] [
2 Set each item
[AV-OUT] Selects an AV source to be output at
the AV OUTPUT port. (
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
( "OFF")
"ON": Switches to the rear view camera video
display when engaging the shift knob of
car to "Reverse".
"OFF": The monitor does not switch to the
rear view camera video display even
when engaging the shift knob of car to
"Reverse".
[R-CAM Mirror] You can flip the left and right
of the rear view camera video display. Set to
"ON" and the rear view will be displayed left
and right in mirror image on the screen.
( "OFF")
⁄
• When in DVD source, "AV-OUT" cannot be set to USB.
When in USB source, "AV-OUT" cannot be set to DVD.
>
] [AV Interface]. (page 56)
"AV-IN")
English 67