A Quick Look At The Controls; Key Functions - Radio Shack 8-IN-ONE REMOTE Owner's Manual

A QUICK LOOK AT THE CONTROLS

Use the illustration below to locate controls and then study the Key
Functions (on the right and the next two pages) to learn how they function.
NOTE: Also refer to the "Key Table" (on page 6) to learn key functions for
specific devices.
4 A Quick Look At The Controls
8- -O R
IN NE EMOTE
K F
EY UNCTIONS
The red LED (Light Emitting Diode)
blinks to show that the remote control is
sending signals.
The LCD (Liquid Crystal Display) has
15 alphanumeric characters that display
status messages during remote control
operation and programming.Also, one or
more icons will appear in the LCD to
indicate the following conditions:
Morning or Afternoon Time
Low Battery
IR Signal Transmission
Use P for all programming sequences.
Use to turn on or off the key backlight.
When this feature is activated, keys will
remain backlit for 5 seconds after the last
key press. In the setup mode, backlighting
will remain on for 30 seconds.
Press POWER once to turn on or off the
selected device.
Press VCR, CBL, SAT, TV, CD, AUX, DVD, or
AUDIO once to select a device to control.
After programming, press MY SYSTEM
once to select your custom system con-
trols. See Using My System on page 17.
Use GUIDE to display the program, guide,
or setup menu for the selected device.
In the VCR, CBL, SAT, and TV modes, use
SCAN (FAV) to scan favorite channels
and/or all channels. See Programming
Favorite Channel Scan and Using Channel
Scan on page 16.