Operating My System - Radio Shack 8-IN-ONE REMOTE Owner's Manual

USING MY SYSTEM
P M S (C
ROGRAMMING Y YSTEM
4. Press SELECT once to enter Audio Control Group assignment.
The last-selected device (e.g., [VCR]) appears.
a. Select a device for Audio Control Group assignment. For
this example, press TV once. This will assign the entire
group of Audio Controls (i.e., VOL+, VOL-, and MUTE) to
the TV. Your device choice (e.g., [TV]) appears.
b. Press SELECT once to accept the assignment in step 4a.
The next Control Group assignment, [CHANNEL]) appears.
5. Press SELECT once to enter Channel Control Group assign-
ment. The last-selected device (e.g., [TV]) appears.
a. Select a device for Channel Control Group assignment. For
this example, press CBL once. This will assign the entire
group of Channel Controls (i.e., CH+, CH-, Keypad (0 ~ 9),
ENTER, LAST, SLEEP, INFO, and TV/VIDEO) to the cable
converter.Your device choice (e.g., [CBL]) appears.
b. Press SELECT once to accept the assignment in step 5b.
The next Control Group assignment, [MENU]) appears.
6. Press SELECT once to enter Menu Control Group assignment.
The last-selected device (e.g., [CBL]) appears.
a. Select a device for Menu Control Group assignment. For
this example, press CBL once. This will assign the entire
group of Menu Controls (i.e., MENU, GUIDE, Cursor
L M
Controls (
,
converter.Your device choice (e.g., [CBL]) appears.
18 Using My System
8- -O R
IN NE EMOTE
)
ONTINUED
, , ), SELECT, and EXIT) to the cable
b. Press SELECT once to accept the assignment in step 6a.
The next Control Group assignment, [PIP]) appears.
7. Press SELECT once to enter the PIP Control Group assign-
ment. The last-selected device (e.g., [CBL]) appears.
a. Select a device for PIP Control Group assignment. For this
example, press TV once. This will assign the entire group
of PIP Controls (i.e., PIP, FREEZE, SWAP, MOVE, and
+100) to the TV. Your device choice (e.g., [TV]) appears.
b. Press SELECT once to accept the assignment in step 7a.
The first Control Group assignment, [PLAYBACK]) appears.
8. At this point, all Control Groups have been assigned. To
or
change an assignment, use
group and make changes by repeating the appropriate step
(3, 4, 5, 6, or 7).
Otherwise, to exit programming, press and hold SELECT
until [SUCCESS] appears, followed by [EXIT SETUP]. The
remote will automatically exit the programming mode and
return to normal operation.
O M S
PERATING Y YSTEM
After programming the My System mode (see the previous section), simply
activate it by pressing MY SYSTEM once. Instantly, groups of remote keys
will be assigned to their programmed devices. In the above example,
pressing MY SYSTEM once would assign the following keys to the VCR, TV,
and cable converter:
VCR: REW, PLAY, FFWD, REC, STOP, and PAUSE
VOL+, VOL-, MUTE, PIP, FREEZE, SWAP, MOVE, and +100
TV:
Cable Converter: CH+, CH-, Keypad (0 ~ 9), ENTER, LAST, SLEEP, INFO,
TV/VIDEO, MENU, GUIDE, Cursor Controls (
SELECT, and EXIT
L M
or to navigate to a specific
L M
, , , ),