Basic Operation; Turning On The Projector - LG BX27C-SL Owner's Manual

Basic Operation

Turning On the Projector

rning On the Projector
1
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
2
Connect the projector's AC power cord into an AC
outlet. The POWER indicator lights red. Open the lens
cap.
3
Press the ON / STAND-BY button on the top control or
on the remote control. The POWER indicator lights
green and the cooling fans start to operate. The
preparation display appears on the screen and 30's
countdown starts.
4
If the projector is locked with a PIN code, PIN code
input dialog box will appear. Enter the PIN code as
instructed on the next page.
NOTE:
• When the Logo select function is set to Off, the logo will
not be shown on the screen.
• When Off is selected in the Display function, Countdown and
logo will not be shown on the screen.
• During the countdown period, all operations are invalid.
Enter a PIN code
Use the Pointed ▲▼ buttons to enter a number. Press Point
► button to fix the number and move the curser to the next
box. The number changes to "". If you fixed an incorrect
number, use the Point ◄ button to move the pointer to the
number you want to correct, and then enter the correct
number by pressing ▲▼ buttons.
Repeat this step to complete entering a three-digit number.
After entering the three-digit number, move the pointer to
Set. Press the SELECT button so that you can start to
operate the projector.
If you entered an incorrect PIN code, PIN code and the
number (
) will turn red for a moment. Enter the correct

PIN code all over again. If there is none correct PIN code
input within 3 minutes,the projector will power off automatically.
What is PIN code?
PIN code is a security code that allows the person who
knows it to operate the projector. Setting a PIN code
prevents unauthorized use of the projector.
A PIN code consists of a three-digit number. Refer to the
PIN code lock function in the Setting Menu on pages 43 for
locking operation of the projector with your PIN code.
0
Set
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the
projector can no longer be started.
Take a special care in setting a
new PIN code; write down the
number in a column on page 67 of
this manual and keep it on hand.
If the PIN code is lost or forgotten,
consult your dealer orservice center.
Select
17