Basic Operation Of The Projector - LG HX300G-JE Owner's Manual

Basic Operation of the Projector

1. Place the projector on a sturdy and horizontal surface with the PC or AV source.
2. Place the projector with the desired distance from the screen. The distance between the projector and the
screen determines the actual size of the image.
3. Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a
right angle, the screen image will be crooked. Although, slight angles can be counteracted using the
Keystone adjustement.
4. Connect the power cable to the projector and the wall outlet after placing the projector in its desired loca-
tion.
projection distance based on the picture format
X/2
Screen height (X)
X/2
Y/2
Screen Width (Y)
Y/2
Diagonal Size (mm)
Screen
Projection offset ratio: 110%
Projection distance (D)
Screen
38.6mm
Projection distance (D)
4 : 3 Scale
Horizontal Size (mm)
Projection Distance (D)
Vertical Size (mm)
Installing and Composition
(mm)
11