LG BX27C-SL Owner's Manual page 69

5. Network Setting with DHCP "Off"
Set DHCP to Off: Assign an IP address manually. Set IP
Address as the IP Address format of PC.
(1) Press SELECT, use ▲▼ to choose "DHCP Off " and
then press SELECT again.
(2) Press the ▲▼ to select the option to adjust, and press
the SELECT button.
(3) Press the button to select the instructions to adjust
the block.
(4) Press the ▲ ▼ direction button to adjust value.
- Select an IP address.
- Select subnet mask number.
- Select the default gateway of the network connected to
the projector.
- Select DNS number.
(5) Select SET by ▲▼ and then Press SELECT.
Then it will display "waiting..."on the screen. Wait until it
disappears.
< Note >
• If Network Setting is not working, check your network conditions. Check the LAN cable connection.
• If the Network Setting is not completed, network functions may not operate normally.
• IP Auto Setting: Select it if there is a DHCP (Dynamic Host Configuration Protocol) server on the
local area network (LAN) via wired connection, the Projector will automatically be allocated an IP
address. The IP address will automatically be determined. Connection to DHCP may not be possible
when the firewall is installed or according to the model of the computer.
• IP Manual Setting: Select it if there is no DHCP server on the network and you want to set the IP
address manually.
• Press the menu button to exit the menu screen.
LAN Control
Network Setting
LAN
Off
DHCP
. . .
192 168 1 100
IP Address
255 . 255 . 255 . 0
Subnet
192 168 1 1
. . .
Gateway
. . .
192 168 1 1
DNS
set cancel
69