Basic Operation Of The Projector - LG HX300G Owner's Manual

Installing and Composition

Basic Operation of the Projector

1. Place the projector on a sturdy and horizontal surface with the PC or AV source.
2. Place the projector with the desired distance from the screen. The distance between the projector and the
screen determines the actual size of the image.
3. Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a
right angle, the screen image will be crooked. Although, slight angles can be counteracted using the
Keystone adjustement. (Refer to page 20.)
4. Connect the power cable to the projector and the wall outlet after placing the projector in its desired loca-
tion.
projection distance based on the picture format
Screen height (X)
Screen Width (Y)
Diagonal Size (mm)
12
Screen
X/2
X/2
Projection distance (D)
Y/2
Screen
Y/2
Projection distance (D)
Horizontal Size (mm)
Projection offset ratio: 110%
38.6 mm
4 : 3 Scale
Vertical Size (mm)
Projection Distance (D)
(mm)