LAN Control
Web page Operation :
1. Check IP address:
Enter network menu and select network information. Press select to check IP address.
2. Enter the IP address into the address bar (figure 8).
ex) http://192.168.1.100
< Note >
• Information on this page needs to be updated every time, when the Web page does
not respond correctly.
3. Set the corresponding items of the projector by the website
1) Standby: Enable the power On or Off by selecting the "On" or "Standby"
2) PCAdj: Auto PC ( RGB ) adjustment will be done by "Auto PC A
70
( figure 8 )
dj".