Manual Pc Adjustment - LG BX27C-SL Owner's Manual

Computer Input mputer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has five independent memory areas to store those parameters manually adjusted. It allows you to
recall the setting for a specific computer.
1
Press MENU button to display on screen menu.
Press Point ▲▼ buttons to choose PC Adjust button,
and then press SELECT button.
2
Use the Point ▲▼ buttons to select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point ◄► buttons to
adjust the setting value.
Fine sync
Use the Point ◄► buttons to adjust the value, eliminating a
flicker from the image displayed
Total dots
Use the Point ◄► buttons to adjust the number of total dots
in one horizontal period to match your PC image.
Horizontal
Use the Point ◄► buttons to adjust the horizontal picture position.
Vertical
Use the Point ◄► buttons to adjust the vertical picture position.
Reset:
To reset the adjusted data, you should choose the "Reset" and then
Click Yes when the dialogue box appears for confirmation. After that,
a ll adjusted va lue will return to the initial state.
Mode free:
To delete the saved data, you should select the Mode free and press ►
or Select. The mode to be deleted will be
highlighted. At the time, click Select.
Store:
To store the adjusted data, you should select Store, and press ►
or Select. Then move the cursor to select the saving
mode from the items 1-5. Finally click Select.
NOTE:
. When input signal is not included in the RGB Input SIGNAL TABLE on page 56,
some Menu of the Manual PC Adjustment function may be disabled.
. Some menu will be disabled, if the signal is above 140 MHz pixel clocks.
28
PC Adjust Menu