Intellimute Pro - Cobra XRS 9690 Operating Instructions Manual

IntelliMute Pro
IntelliMute Pro prevents detection by radar detector detectors (RODs) such
as VG-2, Spectre I and Spectre IV+ when traveling at slower speeds. It is
intended for use by experienced users only.
When IntelliMute Pro is turned On, and engine RPMs are below the IntelliMute
activation point, your detector's radar detection circuits are turned Off to
prevent detection by RODs.
Before IntelliMute Pro can be turned On, you must have turned On and Set
the IntelliMute activation point. (See pages 13 through 15.)
A
CAUTION
00
When IntelliMute Pro is On, NO radar signals will be detected and
NO alerts will be given at RPMs below the IntelliMute activation point.
Tone Visual Display
IntelliMute
Pro
On,
then i blinks in the display
Two beeps
To Turn IntelliMute Pro On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to IntelliMute Pro.
One beep IntelliMute
Pro Off,
then i is steady in the display
IntelliMute Pro On IntelliMute Pro Off
@
English