a
.
•
Your Detector "
Detection
•
Signals Detected
The tables on the following pages show you the types of Signals your
detector will detect, as well as the visual alerts it provides for each of them.
Audio Alerts
A distinctly different Alert tone is used for each type of signal detected
(including separate tones for each laser signal). For X, K, Ka and Ku band
radar signals, the tones will repeat faster as you approach the signal
source. The repeat rate of the tones gives you useful information about
the signal detected. See responding to alerts on page 29.
Visual Display
An indication of the type of signal detected will appear in the DigiView
Data Display. During X, K, Ka and Ku alerts, you will also see from one
to five vertical bars, indicating the strength of the signal detected.
Signal Strength Chart
Signal Strength
=
1
(Weakest Signal)
Signal Strength
=
2
Signal Strength
=
3
-='"'
3
Signal Strength
=
4
-===
4
Signal Strength
=
5
(Strongest Signal)
Nothing Comes Close to a Cobra-
~