Cobra XRS 9690 Operating Instructions Manual page 22

a .
•
Your Detector ; '
Select/Dim Button
@} ...•..
Program/Mute Button
@- ...•...•.........
.•... @
Set/City
Button
To Calibrate the Compass Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode, go to
Set Compass
Tone Visual Display
None Set Compass
Press and release the SeVCity button One beep Drive in 2 circles...
to begin setting the compass.
Press SET when
done...
Within two minutes, drive your
Three beeps Compass Set!
vehicle in a circle twice, then press For two seconds
the Set/City button again. followed by direction
of travel (N, NE, E,
SE, S. SW. Wor NW)
Press and release either the SelecVDim None None
button to proceed to the next user
mode or the Program/Mute button
I
to exit Program mode.
Set Compass
Calibrate Compass Compass Set Direction of Travel
Set Compa ...
<tI>
~~~~
do not press the Set/City button within two minutes after beginning
the set compass process, compass calibration will automatically terminate.
One beep Compass not set. ..
Please try again...
Terminate
Compass n .
Please Ir. ..
@
English