Brc944B2> Wired Remote Controller - Daikin H-Series Engineering Data

EDUS04-924A
13.2 <BRC944B2> Wired Remote Controller
13.2.1 Installation Manual
CAUTION
1. No switch box or staple is supplied. Prepare them locally.
2. No remote controller cord is supplied. Prepare the optional remote controller cord 4 wire.
3. Be sure to turn off the power to any apparatus connected prior to mounting.
4. Prior to mounting equipment, touch something metallic such as a doorknob to remove static
electricity from your body. Never touch the remote controller board or the adapter board.
5. Keep the wiring away from any other power source lines to avoid electric noise (external noise).
6. Select a flat surface, wherever possible, to mount the remote controller. To prevent deformation
of the cases, do not overtighten the mounting screws.
1. Securing the remote controller lower case
Insert a bladed screwdriver into the concave ( ) in the remote controller lower case to remove the
upper case assembly (two locations).
The remote controller board is located on the
upper case. Take care not to scratch the
board with the screwdriver.
(1) Exposed mounting
Secure the remote controller lower case with the
two supplied wood screws.
(2) Embedded mounting
Secure the remote controller lower case with the
two supplied machine screws.
For the field supplied switch box,
use optional accessories
KJB1111A or KJB2121A.
Room Air Conditioners H-Series
Wood screws (φ3.5mm × 16mm)
KJB2121A
Switch box
(Field supplied parts)
Machine screws (M4 × 16)
Upper case
Lower case
Screwdriver
To remove, insert and twist
the screwdriver slightly.
KJB1111A
Optional Accessories
83