Daikin H-Series Engineering Data page 15

Capacity Tables
Symbols:
AFR : Airflow rate
BF : Bypass factor
EWB : Entering wet bulb temp.
EDB : Entering dry bulb temp.
TC : Total capacity
SHC : Sensible heating capacity (kW) / (kBtu/h)
PI : Power input
14
Note:
(m /min.) 1. Ratings shown are net capacities which include a deduction for indoor fan
3
motor heat.
2.
3. TC, PI and SHC must be calculated by interpolation using the figures in
(°C) / (°F)
the tables. (Figures out of the tables should not be used for calculation.)
(°C) / (°F)
4. About SHC which are not mentioned on the table, please calculate them
with around values in direct proportion.
(kW) / (kBtu/h)
5. Capacities are based on the following conditions.
Corresponding refrigerant piping length : 25 ft
Level difference : 0 ft
(kW)
6. Cooling capacity at –15°CDB and 5°FDB.
3D063318
shows nominal (rated) capacities and power input.
Temp: Celsius
TC, SHC, PI: kW
60 Hz, 208 - 230 V
INDOOR OUTDOOR
EWB EDB –15 (°CDB)
°C °C TC SHC PI
14.0 20.0 5.49 4.28 0.49
Temp: Fahrenheit
TC, SHC: kBtu/h
PI: kW
60 Hz, 208 - 230 V
INDOOR OUTDOOR
EWB EDB 5 (°FDB)
°F °F TC SHC PI
57.2 68.0 18.73 14.59 0.49
EDUS04-924A
Room Air Conditioners H-Series