Engine Oil Change - Honda Outboard Motor BF130A Owner's Manual

SERVICING YOUR OUTBOARD MOTOR

Engine Oil Change

An engine oil evacuation/filling
device may be used to remove/add
the engine oil.
Drain the used oil while the engine is
warm. Warm oil drains quickly and
completely.
1. Unlock and remove the engine
cover (p. 61 ).
DRAIN PLUG
DRAIN PLUG COVER
2. Remove the screw from the oil
drain cover, and remove the cover.
64
WASHER
GUIDE
SCREW
3. Place a suitable container below
the oil drain guide to catch the
used oil, then remove the oil filler
cap and the drain plug.
4. Allow the used oil to drain
completely, then reinstall the
engine oil drain plug, and tighten it
securely.
DRAIN PLUG
Improper disposal of engine oil
can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do
not discard it in a trash bin or
dump it on the ground.
5. Install the oil drain cover and
secure it with the screw.
6. With the outboard motor in a
vertical position, fill to the upper
limit mark on the dipstick (p.
with the recommended oil.
Engine oil refill capacity:
Without oil filter change:
5.9 US qt (5.6 )
With oil filter change:
6.9 US qt (6.5 )
7. Install the oil filler cap and tighten
it securely.
8. Install and lock the engine cover.
63 )