Top-Mount Type - Honda Outboard Motor BF130A Owner's Manual

OPERATION
During the warm-up period, check
the oil pressure indicator (p.
overheating indicator (p.
cooling system indicator (p.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS,
85 .
5. If the fast idle control was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
44

Top-Mount Type

30 ),
EMERGENCY STOP
30 ), and
SWITCH
31 ).
p.
SWITCH CLIP
1. Put the emergency stop switch clip
in the emergency stop switch, and
attach the lanyard to your PFD
(Personal Flotation Device) or to
your wrist, as shown.
The engine will not start or run,
unless the clip is in the switch.
The emergency stop switch clip
and lanyard system is a safety
device that will stop the engine if
you fall away from the controls
while operating the boat.
Always attach the lanyard to your
PFD, or to your wrist, before
starting the engine.
LANYARD